NF ZM2371, Instruction Manual

Page: 50 / 255

3.5 Basic Operations
3-20 ZM2371/ZM2372
Input of exponential part
_ EXP _ + [ _ x _ ]
Indicates that after
_
EXP
_
key is pressed, the key expressed as
x
on the right
side is pressed.
If
_
EXP
_
key is pressed during input of a numeric value, EXP is displayed at
the lower right of display, waiting for input of exponential part. In this state,
press any key, so that exponential part x written on the right side of that key
can be input.
Exponential part that can be input: p (10
-12
), n (10
-9
),

(10
-6
), m (10
-3
), k (10
3
),
M (10
6
).
Input exponential part or press _
EXP
_ key again, and the exponential part
input waiting state is cancelled.
EXIT operation
With the setting menu, if
_
ENTR
_
| [EXIT]
key is pressed without setting or
selecting a value, one-previous menu is returned. However, depending on the
parameter, the setting menu is closed and the measurement screen comes
back. There are some parameters that automatically return to one-previous
menu or measurement screen without executing the EXIT operation, after a
value was set or selected.

Reset of error message
An error message may be displayed when, for instance, the input value exceeds the setting
range.
The error message can be reset by pressing any key. After confirming the contents of an
error, press the
_
ENTR
_
| [EXIT]
key at the lower right for instance to reset the error
message.
ZM2372
EXP
N N N
x
EXP
+