NF ZM2371, Instruction Manual

Page: 168 / 255

5.6 Command Explanation
5-41 ZM2371/ZM2372
:CALCulate2:LIMit:STATe {ON|OFF|1|0}
:CALCulate2:LIMit:STATe?
Description: Sets/queries whether the limit comparison function of secondary
parameter is used or not.
Parameters: {ON|1} Enables the limit comparison function of secondary
parameter.
{OFF|0} Disables the limit comparison function of secondary
parameter.
Setting example: :CALC2:LIM:STAT ON
Sets to enables the limit comparison function of secondary parameter.
Response: {1|0}
Query example: :CALC2:LIM:STAT?
Response example: 1
The limit comparison function of secondary parameter is enabled.
Remarks:
When the secondary parameter limit comparison function is enabled,
•
the comparator operation changes to the limit comparison, and
•
BIN2 - BIN14 sorting is not executed. (Bin sorting is restricted)
•
The comparator result is displayed on the panel, and also
•
the comparator result is output to the handler interface.
When the secondary parameter limit comparison function is disabled,
the comparator function is set to OFF (disabled) if the primary
parameter limit comparison is disabled.
:CALCulate2:LIMit:UPPer[:DATA] <upper limit value>
:CALCulate2:LIMit:UPPer[:DATA]?
Description: Sets/queries the upper limit value of secondary parameters used for
limit comparison.
Parameters: <upper limit value> {numeric value, range 0,  (1E-16 to
9.11)
}
MAX / MIN can be used.
Setting example: :CALC2:LIM:UPP 12.3456E-06
Sets the upper limit value of secondary parameters used for limit
comparison to 12.3456
 .
Response: <upper limit value> {numeric value, format NR3}
Query example: :CALC2:LIM:UPP?
Response example: +1.23456E-05
The upper limit value of secondary parameters used for limit
comparison is 1.23456E-05 (= 12.3456
 ).