NF ZM2371, Instruction Manual

Page: 213 / 255

6.1 Outline and Switching of Operation Mode
6-2 ZM2371/ZM2372
6.1 Outline and Switching of Operation Mode
The
ZM2372
has basic structure that can change the remote control commands by switching
the operation mode. At present, however, only one standard operation mode is supported.
The
ZM2371
can use the standard operation mode only.
1) Operation mode 0
This mode is the standard operation mode of
ZM2371 / ZM2372
. The factory default setting
is the operation mode 0.
The operating method and functions in the operation mode 0 are described in
Chapters 3, 4,
and 5
.
2) Operation mode 1
This mode can be set only when the
ZM2372
is extended so that it has two operation modes.
The operation mode 1 is different in remote control commands from the operation mode 0.

Switching of operation mode
The operation mode is switched with the system settings menu.
_ SHIFT _ + [ SYSTEM ]
_ SHIFT _ + [SYSTEM]
keys to display the system settings menu.
S Y S T E M s e t t i n g s
0 ) I N T E R FA C E 1 ) B E E P E R > N E X T
Options (first page)
Though no options are displayed in the system menu, if
_ - _ _ 2 _ _ 3 _ _ 0 _ _ 0 _
keys are pressed
in this order, the operation mode setting menu is displayed as shown below.
O p e r a t i o n m o d e : 0
Current setting
0 ) M o d e 0
Option
0 ) M o d e 0 1 ) M o d e 1
Options (when
ZM2372
is extended)
If a mode is set or EXIT key is pressed, the measurement screen comes back.
When the operation mode is set, the initialization equivalent to “INITIALIZE ALL” in each
operation mode is executed. At present, for both
ZM2371
and
ZM2372
, only the operation
mode 0 can be selected. If the operation mode 0 is selected, all settings are reset to the
factory default settings.
The operation mode cannot be initialized by any method other than the selection of
operation mode 0.
In the operation mode 1, the underline cursor is displayed at the end of second line of the
display.
Operation mode 0
・ ・ ・ ・ ・ ・ ・
1 . 0 0 0 0 k
・ ・ ・ ・ ・ ・ ・
1 . 0 0 V c
Operation mode 1
・ ・ ・ ・ ・ ・ ・
1 . 0 0 0 0 k
・ ・ ・ ・ ・ ・ ・
1 . 0 0 V c
Underline