NF ZM2371, Instruction Manual

Page: 165 / 255

5.6 Command Explanation
5-38 ZM2371/ZM2372
:CALCulate1:LIMit:UPPer:STATe {ON|OFF|1|0}
:CALCulate1:LIMit:UPPer:STATe?
Description: Sets/queries whether the upper limit value is compared or not in the
limit comparison of primary parameters.
Parameters: {ON|1} Upper limit value is compared.
{OFF|0} Upper limit value is not compared (corresponding to No
Limit of panel operation).
Setting example: :CALC1:LIM:UPP:STAT ON
Sets so that the upper limit value is compared in the primary parameter
limit comparison.
Response: {1|0}
Query example: :CALC1:LIM:UPP:STAT?
Response example: 1
The upper limit value is compared in the primary parameter limit
comparison.
:CALCulate1:MATH:EXPRession:NAME {DEV|PCNT}
:CALCulate1:MATH:EXPRession:NAME?
Description: Sets/queries the deviation display format of primary parameters.
To display the deviation, set the deviation display format, and further
set so that the deviation is displayed using :CALCulate1:MATH:STATe
ON command.
Set the referenced value with :DATA[:DATA] command.
Parameters: DEV Deviation: Deviation from reference value (= measured
value
 reference value) is displayed.
PCNT Deviation %: Deviation (to reference value) is displayed with
percent value.
Setting example: :CALC1:MATH:EXPR:NAME PCNT
Sets the deviation display format of primary parameters to deviation %.
Response: {DEV|PCNT}
Query example: :CALC1:MATH:EXPR:NAME?
Response example: PCNT
The deviation display format of primary parameters is deviation %.
:CALCulate1:MATH:STATe {ON|OFF|1|0}
:CALCulate1:MATH:STATe?
Description: Sets/queries whether the primary parameter deviation display / output
is executed or not.
Parameters: {ON|1} Enables the deviation display / output.
{OFF|0} Disables the deviation display / output.
Setting example: :CALC1:MATH:STAT ON
Sets to enables the primary parameter deviation display / output.
Response: {1|0}
Query example: :CALC1:MATH:STAT?
Response example: 1
The primary parameter deviation display / output is enabled.
Remarks:
If the primary parameters or secondary parameters are changed
with :CALCulate{1|2}:FORMat command, the deviation display / output
of both primary and secondary parameters is disabled automatically.
Set the primary parameters and secondary parameters prior to the
deviation display / output.