NF ZM2371, Instruction Manual

Page: 109 / 255

4.5 Changing the Contents Displayed on the Second Line of Measurement Screen (Auxiliary Display)
4-22 ZM2371/ZM2372
4.5 Changing the Contents Displayed on the Second Line of
Measurement Screen (Auxiliary Display)
Normally the specified setting information is displayed on the second line (Auxiliary
display) of measurement screen. It is possible to change those contents into other setting
information or voltage/current monitor values.
_ AUX DISP _
Press the
_ AUX DISP _
key to display the auxiliary display selection setting menu.
A u x D i s p l a y : S ta t u s
Current setting
0 ) Sta t u s 1 ) P r i - L i m i t 2 ) S e c - L i m i t > N E X T
Options (first page)
3 ) P r i - S e c R E F 4 ) I - V m o n i t o r < P R E V
Options (second page)
Status
Measurement condition (initial value)
A 1 0 0 k

FA S T 1 0 0 I n t O p S h L d 1 m
・ ・ ・
ex.
Pri- Limit Lower and upper limit values of primary parameter (specified Bin)
1 0 : + 9 7 0 . 0 0 0 n F t o + 1 . 0 3 0 0 0 µ F
・ ・ ・
ex.
Specify the Bin number in the Bin number input menu.
Sec-Limit
Lower and upper limit values of secondary parameter
S e c + 0 . 0 0 0 0 0 t o + 1 2 . 0 0 0 0 m
・ ・ ・
ex.
When comparator and limit comparison are disabled that Pri-Limit
and Sec-Limit are being selected, the status appears.
Pri-Sec REF Reference values for deviation display of both primary and secondary
parameter
R E F : P + 1 . 0 0 0 0 0 µ F S + 1 0 0 . 0 0 0 m
・ ・ ・
ex.
When the deviation display and deviation comparison are disabled
that Pri-Sec REF is being selected, the status appears.
I-V monitor
Current monitor value and voltage monitor value
I m : + 1 2 3 . 4 5 6 m A V m : + 1 0 0 2 . 3 4 m V
・ ・ ・
ex.
If a setting is made or the EXIT operation is performed, the measurement screen
comes back.
Select the parameter you need to display by the numeric key.
_ AUX DISP _