NF ZM2371, Instruction Manual

Page: 42 / 255

3.3 Operation Tree
3-12 ZM2371/ZM2372
Operation Tree (3/3)
_ SHIFT _ + [HANDLER]
: { Handler interface setting menu }
{ OUT OF BINS output setting menu }
{ Bin extension menu }
{ Trigger polarity setting menu }
{ Memory selection line setting menu }
{ Check menu }
_ SHIFT _ + [CONTACT] :
{ Contact check setting menu }
{ Real time check setting menu }
_ SHIFT _ + [INIT]
: { Initialize menu }
_ SHIFT _ + [SAVE]
: { Setting/correction value memory save menu }
_ SHIFT _ + [RECALL]
: { Setting/correction value memory recall menu }
_ SHIFT _ + [SYSTEM]
: { System setting menu }
{ Remote control interface setting menu }
{ USB check screen }
{ RS-232 setting menu }
{ Communication speed setting menu }
{ Message terminator setting menu }
{ Hand shake setting menu }
{ GPIB address setting menu }
{ Beeper setting menu }
{ Fully initialization menu }
Self diagnosis
Version display
{ Operation mode setting menu }
_ LOCAL _
: Shifts from remote to the local
_ SHIFT _ + [KEY LOCK]
: Key operation disabled / enabled