NF ZM2371, Instruction Manual

Page: 131 / 255

5.1 Preparations Before Use
5-4 ZM2371/ZM2372
5.1.2.2 Preparation of ZM2371 / ZM2372
If USB is selected with the remote control interface setting menu, the USB confirmation
screen is displayed as shown below.
U S B Ve n d o r : 3 4 0 2 P r o d u c t : 2 2 S N : 9 0 8 3 2 5 1
E X I T
Vendor Vendor ID = 3402 (decimal notation), which indicates NF Corporation.
It is 0x0D4A in hexadecimal notation.
Product Product ID = 22 (decimal notation), which indicates
ZM2371
.
Product ID = 23 (decimal notation), which indicates
ZM2372
.
They are 0x0016 and 0x0017 respectively in hexadecimal notation.
SN Serial Number = 9083251 (example), which indicates 7-digit serial
number uniquely assigned to each device.
Perform the EXIT operation to return to one-previous menu.
5.1.2.3 USB Device Identification
Connect the
ZM2371 / ZM2372
to the USB connector of the computer using commercially
available USB cable. Connection via USB hub may result in an operation failure.
ZM2371 / ZM2372
is automatically identified by connecting it with USB to the computer on
which USBTMC class driver is installed.
The
ZM2371 / ZM2372
in the system is identified with the Vendor ID, Product ID, and Serial
Number displayed on the USB confirmation screen. Use these values when specifying the
device manually due to, for instance, automatic recognition error.