NF ZM2371, Instruction Manual

Page: 189 / 255

5.6 Command Explanation
5-62 ZM2371/ZM2372
[:SENSe]:CORRection[:STATe] {ON|OFF|1|0}
Description: Sets whether the correction is executed or not to the correction items
specified by [:SENSe]:CORRection:COLLect:METHod command.
Parameters: {ON|1} Enables target correction items.
{OFF|0} Disables all the OPEN, SHORT, and LOAD corrections.
Setting example: :CORR ON
Enables target correction items.
[:SENSe][:FIMPedance]:APERture[:MODE] {SHORt|MEDium|LONG|RAPid|FAST|SLOW
|VSLOw|<measurement time>}
[:SENSe][:FIMPedance]:APERture[:MODE]?
Description: Sets/queries the measurement time or measurement speed.
Parameters: RAPid Sets measurement time to shortest (/ measurement
speed to fastest).
{SHORt|FAST} Sets measurement time to short (/ measurement
speed to fast).
MEDium Sets measurement time or measurement speed to
standard value.
{LONG|SLOW} Sets measurement time to long (/ measurement
speed to slow).
VSLOw Sets measurement time to longest (/ measurement
speed to lowest).
For concrete measurement time,

“3.5.6.5 Measurement Speed”
Setting example: :APER MED
Sets measurement time (/ measurement speed) to standard.
Response: {RAP|SHOR|MED|LONG
｜
VSLO}
Query example: :APER?
Response example: MED
The measurement time (/ measurement speed) is standard.
Remarks: The following measurement time can also be used as a parameter.
<measurement time> {numeric value, range either 0.025, 0.065, or 0.5,
unit: s}
Suffix M (10
-3
), unit S can be used. Example: 25MS (= 0.025)
However, actual measurement time will be different from the specified
value since the measurement time is rounded to 0.025, 0.065 or 0.5
whichever nearest, and then it is converted into SHORt, MEDium, or
LONG.