5.6 Command Explanation
5-61
ZM2371/ZM2372
[:SENSe]:CORRection:OPEN[:STATe] {ON|OFF|1|0}
[:SENSe]:CORRection:OPEN[:STATe]?
Description:
Sets/queries whether OPEN correction is executed or not.
Parameters:
{ON|1}
Enables the OPEN correction.
{OFF|0}
Disables the OPEN correction.
Setting example:
:CORR:OPEN ON
Sets so as to enable the OPEN correction.
Response:
{1|0}
Query example:
:CORR:OPEN?
Response example: 1
The OPEN correction is enabled.
[:SENSe]:CORRection:SHORt[:STATe] {ON|OFF|1|0}
[:SENSe]:CORRection:SHORt[:STATe]?
Description:
Sets/queries whether SHORT correction is executed or not.
Parameters:
{ON|1}
Enables the SHORT correction.
{OFF|0}
Disables the SHORT correction.
Setting example:
:CORR:SHOR ON
Sets so as to enable the SHORT correction.
Response:
{1|0}
Query example:
:CORR:SHOR?
Response example: 1
The SHORT correction is enabled.
[:SENSe]:CORRection:SPOT[:STATe] {ON|OFF|1|0}
[:SENSe]:CORRection:SPOT[:STATe]?
Description:
Sets/queries whether the OPEN correction and SHORT correction are
executed with current one frequency only or in full frequency range.
Parameters:
{ON|1}
Enables the SPOT correction.
Correction is executed with current frequency only.
{OFF|0}
Disables the SPOT correction.
Correction is executed in full frequency range.
Setting example:
:CORR:SPOT ON
Sets so as to enable the SPOT correction.
Response:
{1|0}
Query example:
:CORR:SPOT?
Response example: 1
The SPOT correction is enabled.
Remarks:
It will be better to enable SPOT correction when the LOAD correction is
executed.
If the frequency is changed when the setting has been made so that the
correction is executed with current frequency only, the OPEN, SHORT,
and LOAD corrections are all disabled automatically.
Summary of Contents for ZM2371
