Program 47 : InMail
47-08 : Call Routing Mailbox Options
Level:
IN
Description
Use
Program 47-08 : Call Routing Mailbox Options
to set the options for mailboxes assigned as
Call Routing Mailboxes in 47-07-02 : Mailbox Type was set Type 1 (Call Routing).
Input Data
Routing Mailbox Number
1 ~ 32
Item
No.
Item
Input Data
Description
Default
01
Dial Action Table
1 ~ 32
Use this option to assign the Dial Action
Table to the Call Routing Mailbox. The Dial
Action Table defines the dialing options for
the call Routing Mailbox.
1 (Dial Action Ta-
ble 1)
02
Screened Transfer
Timeout
0 ~ 255 seconds
Entering 0 causes imme-
diate recall.
(Scrn Trf Timeout)
Use this option to set how long a Screened
Transfer (TRF) from the Automated At-
tendant rings an unanswered extension
before recalling.
This option has a similar function as Cus-
tomize: Mailbox Options: Call Routing:
[Call Handling] Options: Delay Rings Be-
fore Redirect Transfer in InMail.
15 seconds
03
Time Limit for Dialing
Commands
0 ~ 99 seconds
Entering 0 causes the
Automated Attendant to
immediately route callers
to the Timeout destina-
tion programmed in the
active Dial Action Table.
(Dialing Timeout)
This option determines how long InMail
waits for an Automated Attendant caller to
dial before routing the call to the Timeout
destination.
Be sure your Dial Action Tables have a
Timeout action programmed.
If the caller waits too long to dial:
When the associated Dial Action Table has
a Timeout action programmed, the caller
routes to that destination.
When the associated Dial Action Table
does not have a Timeout action program-
med, the Instruction Menu repeats three
times and then InMail hangs up.
5 seconds
04
Fax Detection
0 = No (Disabled)
1 = Yes (Enabled)
Use this option to enable or disable Fax
Detection for the Call Routing Mailbox. In
enabled, the InMail Automated Attendant
(when using this Call Routing Mailbox) de-
tects incoming fax CNG tone. The fax call
then routes to the company fax machine
according to the setting of 47-01-06 : Fax
Extension. If disabled, the Automated At-
tendant does not detect incoming fax calls.
0
05
Fax Extension
Up to eight digits
No Setting
SL2100
ISSUE 2.0
2-458
Program 47 : InMail
Program
47
Summary of Contents for UNIVERGE SL2100
