NEC UNIVERGE SL2100, Programming Manual

Page: 66 / 678

Program 10 : System Configuration Setup
10-46 : DT800/DT700 Server Information Setup
Level:
IN
Description
Use Program 10-46 : DT800/DT700 Server Information Setup to set up the information of DT800
Server.
Input Data
Item
No.
Item Input Data Description Default Related
Program
01 Register Mode 0 = Plug and Play
1 = Auto
2 = Manual Plug and Play:
When the phone boots up, it reports
the ext. assigned in the phone or
chooses the next available exten-
sion in the system. Password is not
required.
Auto:
If set to Auto, the SIP user name
and password must be entered on
the actual IP phone. These settings
must match 84-22/15-05-27, or the
phone does not come on-line.
Manual:
When the phone boots up, it
prompts user to enter a user ID and
password before logging in. It
checks this user ID/password
against 84-22/15-05-27. If there is
no match, the phone does not come
online.
0
04 Server Name Up to 32 characters Assign the Server name to be used
in the SIP URL. sipphd
06 Register Port 0 ~ 65535 Assign the port number in which the
SIP messages are sent to on the
VoIPDB.
This same port number must be as-
signed in the SIP Multiline terminals. 5080
07 Encryption Mode 0 = Off
1 = All If this command is changed, it re-
quires a CPU reset. 0
08 Encryption Type 0 = Mode 1 0
09 One Time Pass-
word Up to 10 characters (0
~ 9,
*
, #)
Web pro indicates password with
*
mark.
No Setting 10-46-07
10 1st DT800 to reg-
ister 1 ~ 128 1 10-46-01
11 Multicast IP Ad-
dress 224.0.0.0 ~
239.255.255.255 This sets the Multicast IP address
so that two or more main devices
don’t overlap on the same network,
or if Multicast is used by other IP
services. 224.0.0.10
12 Multicast Port 0 ~ 65535 30000
13 Subscribe Ses-
sion Port 0 ~ 65535 5081
SL2100 ISSUE 2.0
2-42 Program 10 : System Configuration Setup
Program
10