![background image](http://html.mh-extra.com/html/nec/univerge-sl2100/univerge-sl2100_programming-manual_248294472.webp)
Item
No.
Item
Input Data
Description
Default
05
Auto Erase/Save of
Messages
0 = Erase
After the subscriber lis-
tens to the entire new
message and hangs up,
InMail erases the mes-
sage.
1 = Save
After the subscriber lis-
tens to the entire new
message and hangs up,
InMail saves the mes-
sage.
Use this option to determine what happens
when a Subscriber Mailbox user complete-
ly listens to a new message and then exits
the mailbox without either saving (
SA
) or
erasing (
E
) the message. Depending on
the setting of this option, InMail either au-
tomatically saves or erases the message.
If the mailbox user hangs up before listen-
ing to the entire new message, InMail re-
tains the message as a new message.
1
06
Message Retention
0 ~ 99 Days
(0 = Indefinite)
Use this option to determine how long a
Subscriber Mailbox retains held and saved
messages. If a message is left in a Sub-
scriber Mailbox longer than this interval,
InMail deletes it.
0
07
Recording Conversa-
tion Beep
0 = No (Disabled)
1 = Yes (Enabled)
(Rec Conv Beep)
Use this option to enable or disable the
Conversation Record beep. If enabled, all
parties on a call hear the voice prompt
“Recording”, followed by a single beep
when the extension user initiates Conver-
sation Record. If disabled, the voice
prompt and beep do not occur. When you
disable the Conversation Record beep, the
following voice prompts do not occur while
InMail records the conversation:
Recording
(followed by a beep)
That mailbox is full
(if the mailbox message storage capacity
is reached)
You have reached the recording limit
(if the recorded message is too long)
Provides an additional Conversation Re-
cord beep. This beep repeats according to
the setting of
Program 45-01-06 : Voice
Mail Integration Options : Record Alert
Tone Interval Time
(0 ~ 64800 seconds).
To disable the Conversation Record beep,
enter 0 for this option.
1
08
Message Waiting
Lamp
0 = No (Disabled)
1 = Yes (Enabled)
(Update MW Lamp)
Use this option to enable or disable Mes-
sage Waiting lamping at the extension as-
sociated with the Subscriber mailbox. For
Subscriber Mailboxes, you should leave
this option enabled. For Guest Mailboxes,
you should leave this option disabled.
1
09
Auto Attendant Direct
to Voice Mail
0 = No (Disabled)
1 = Yes (Enabled)
(Auto-ATT DND)
Use this option to enable or disable Auto
Attendant Do Not Disturb. When a sub-
scriber enables Auto Attendant Do Not
Disturb, an Automated Attendant caller
routes directly to the mailbox, hears the
greeting, and is asked to leave a message.
A subscriber can also enable Auto Attend-
ant Do Not Disturb while recording their
mailbox greeting.
0
SL2100
ISSUE 2.0
2-448
Program 47 : InMail
Program
47
Summary of Contents for UNIVERGE SL2100
