NEC UNIVERGE SL2100, Programming Manual

Page: 665 / 678

Program 92 : Copy Program
92-04 : Extension Data Swap
Level:
IN
Description
This program is available only via telephone programming and not through PC Programming.
Use Program 92-04 : Extension Data Swap to swap data between two extensions.
Input Data
Item No. Item Input Data Default
01 1st Extension Number Up to eight digits. -
02 2nd Extension Number -
The following table lists Programs that use the Extension Data Swap function.
Program Number Program Name
11-02 Extension Numbering
12-05 Night Mode Group Assignment for Extensions
13-03 Speed Dial Group Assignment for Extensions
13-06 Station Speed Dial Number and Name
15-01 Extension Basic Data Setup
15-02 Multi-Line Telephone Basic Data Setup
15-03 Single Line Telephone Basic Data Setup
15-06 Trunk Access Map for Extension
15-07 Programmable Function Key
15-08 Incoming Virtual Extension Ring Tone Setup
15-09 Virtual Extension Ring Assignment
15-10 Incoming Virtual Extension Ring Tone Order Setup
15-11 Virtual Extension Delayed Ring Assignment
15-12 Conversation Recording Destination for Extension
15-14 Programming One-Touch Keys
15-17 CO-Message Waiting Indication
15-18 Virtual Extension Key Enhance Options
15-20 LCD Line Key Name Assignment
15-25 DESI-less Page Setup
16-02 Department Group Assignment for Extensions
20-06 Class of Service for Extension
20-29 Timer Class for Extensions
21-02 Trunk Group Routing for Extension
ISSUE 2.0 SL2100
Programming Manual 2-641
Program
92