NEC UNIVERGE SL2100, Programming Manual

Page: 179 / 678

L E D P a tte rn 0 :[O F F ]
L E D P a tte rn 1 :[F L : O n (5 0 0 m s)/Off(5 0 0 m s)]
O n
O ff
O n
O ff
L E D P a tte rn 2 :[W K : O n (2 5 0 m s)/Off(2 5 0 m s)]
O n
O ff
L E D P a tte rn 3 :[R W : O n (1 2 5 m s)/Off(1 2 5 m s)]
O n
O ff
L E D P a tte rn 4 :[IR : O n (1 2 5 m s)/Off(1 2 5 m s)/ O n (1 2 5 m s)/Off(6 2 5 m s)]
L E D P a tte rn 5 :[IL O n (8 7 5 m s)/Off(1 2 5 m s)]
L E D P a tte rn 6 :[IW O n (6 2 5 m s)/Off(1 2 5 m s)/O n (1 2 5 m s)/Off(1 2 5 m s)]
L E D P a tte rn 7 :[O N ]
O n
O ff
O n
O ff
O n
O ff
O n
O ff
2W Digital/IP Multiline Terminal
LED Indication Reference :
ON = LED pattern 7. (2W Digital/IP Multiline Terminal)
OFF = LED pattern 0. (2W Digital/IP Multiline Terminal)
Rapid Blink = LED pattern 3. (2W Digital/IP Multiline Terminal)
Slow Blink (General Function Level) = LED pattern 5 (2W Digital/IP Multiline Terminal).
Slow Blink (Appearance Function Level) = LED pattern 1.
Fast Blink = LED pattern 3 (2W Digital/IP Multiline Terminal).
Stutter Blink = LED pattern 4 (2W Digital/IP Multiline Terminal).
Conditions
• When a key is programmed using service code 752, it cannot be programmed with a function using
the 751 code until the key is undefined (000). For example with a Park Key programmed by dialing
752 +
*
04 must be undefined by dialing 752 + 000 before it can be programmed as a Voice Over
key by dialing 751 + 48.
Feature Cross Reference
None
ISSUE 2.0 SL2100
Programming Manual 2-155
Program
15