NEC UNIVERGE SL2100, Programming Manual

Page: 400 / 678

Program 34 : Tie Line Setup
34-09 : ANI/DNIS Service Options
Level:
IN
Description
Use Program 34-09 : ANI/DNIS Service Options to define the ANI/DNIS service option setup for
E&M Class of Service.
Input Data
Class of Service 1 ~ 15
Item
No.
Item Input Data Description Default Related
Program
01 Receive Format 0 = Address
1 =
*
ANI
*
2 =
*
DNIS
*
3 =
*
ANI
*
Address
*
4 =
*
ANI
*
DNIS
*
5 = * DNIS * ANI *
(
*
= Delimiter Code)
Use this option to specify the format
of the ANI/DNIS data received from
the Telco. Make sure your entry is
compatible with the service the Tel-
co provides. The character
*
indi-
cates a delimiter.
If Program 34-01-02 is selected
to 2 (MF), this Program works
only as 4 =
* ANI * DNIS * .
COS 1 = 0
COS 2 ~ 15 = 0
34-01-02
34-09-02
02 Delimiter Dial
Code 1 ~ 9, 0, #, * This option defines the character
Telco uses as a delimiter (see en-
tries 1 ~ 5 in Item 1 above). Valid
entries are 0 ~ 9, #, and
*
.
COS 1 = *
COS 2 ~ 15 =
*
34-09-01
03 Route Setup of
Receive Dial 0 = Fixed Route (Item
08) (No Routing)
1 = Routes on Re-
ceived DNIS or Ad-
dress Data
2 = Routes on Re-
ceived ANI Data This option specifies the source of
the data the system uses to route in-
coming ANI/DNIS calls. If option
2 is
selected, refer to Program 34-09-04.
COS 1 = 0
COS 2 ~ 15 = 0
22-09-01
22-11-01
34-09-04
34-09-08
SL2100 ISSUE 2.0
2-376 Program 34 : Tie Line Setup
Program
34