NEC UNIVERGE SL2100 Programming Manual Download Page 405

Page: 405 / 678

Program 35 : SMDR Account Code Setup

35-02 : SMDR Output Options

Level:

Description

Use

Program 35-02 : SMDR Output Options

to set the SMDR (Station Message Detail Recording)

output options. Refer to the following chart for a description of each option, its range and default
setting.

Input Data

Item

No.

Item

Input Data

Description

Default

Toll Restricted Call

0 = Not Displayed
1 = Displayed

SMDR can include or exclude calls
blocked by Toll Restriction.

PBX Calls

0 = Not Displayed
1 = Displayed

When the system is behind a PBX, SMDR
can include all calls (1) or just calls dialed
using the PBX trunk access code (0).

Trunk Number or
Name

0 = Name
1 = Number

Select whether the system should display
the trunk name (0) or the number (1) on
SMDR reports.

If this option is set to 1, Program
35-02-14 must be set to 0.

Summary (Daily)

0 = Not Displayed
1 = Displayed

Set this option to (1) to have the SMDR re-
port provides a daily summary (at midnight
every night).

Summary (Weekly)

0 = Not Displayed
1 = Displayed

Set this option to (1) to have the SMDR re-
port provides a weekly summary (every
Saturday at midnight).

Summary (Monthly)

0 = Not Displayed
1 = Displayed

Set this option to (1) to have the SMDR re-
port provides a monthly summary (at mid-
night on the last day of the month).

Toll Charge Cost

0 = Not Displayed
1 = Displayed

Set this option to (1) have the SMDR re-
port include toll charges.

Incoming Call

0 = Not Displayed
1 = Displayed

Enable this option (1) to have the SMDR
report include incoming calls. If you disa-
ble this option (0), incoming calls do not
print.

Extension Number or
Name

0 = Name
1 = Number

Set this option (1) to have the SMDR re-
port include extension numbers. Set this
option (0) to have the SMDR report include
extension names.

All Lines Busy (ALB)
Output

0 = Not Displayed
1 = Displayed

Determine if the All Lines Busy (ALB) indi-
cation should be displayed.

Walking Toll Restric-
tion Table Number

0 = Not Output
1 = Output

DID Table Name Out-
put

0 = Not Displayed
1 = Displayed

Determine if the DID table name should be
displayed.

CLI Output When DID
to Trunk

0 = Not Displayed
1 = Displayed

Determine if the CLI output should be dis-
played for DID.

ISSUE 2.0

SL2100

Programming Manual

2-381

Program

Summary of Contents for UNIVERGE SL2100







































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for UNIVERGE SL2100

Reviews:

Related manuals for UNIVERGE SL2100

Brands by name

Popular brands

NEC UNIVERGE SL2100, Programming Manual

Search results

Summary of Contents for UNIVERGE SL2100

Reviews:

Related manuals for UNIVERGE SL2100

Brands by name

Popular brands