NEC UNIVERGE SL2100, Programming Manual

Page: 349 / 678

Program 25 : VRS/DISA Setup
25-06 : VRS/DISA One-Digit Code Attendant Setup
Level:
IN
Description
Use Program 25-06 : VRS/DISA One-Digit Code Attendant Setup to set up single digit dialing
through the VRS. This gives VRS callers single key access to extensions, the company operator,
Department Calling Groups and Voice Mail. For each VRS message set to answer outside calls (refer
to Programs 25-04 and 25-05), you specify:
• The digit the VRS caller dials (0 ~ 9,
*
, #). Keep in mind that if you assign destinations to digits,
outside callers cannot dial system extensions.
• The destination reached (Maximum eight digits) when the caller dials the specified digit.
The destination can be an extension, a Department Calling pilot number or the Voice Mail master
number. A one-digit code can be assigned for each Automated Attendant message.
Example:
Message Number = 01, Destination = 2, Next Message Number = 0, Dial = 399
In this example, when 2 is dialed by an outside caller, the system transfers the call to 399. This means
that extension 200~299 cannot receive calls from VRS/DISA users during/after VRS Message 01.
Input Data
Attendant Message Number 1 ~ 100
Received Dial 1 ~ 9, 0, * , #
Item
No.
Item Input Data Description Default
01 Next Attendant Mes-
sage Number 0 ~ 100 (0 = No Setting)
101 = Voice Mail an-
swers
104 = Refer to
25-04 :
VRS/DISA Transfer Ring
Group With No Answer/
Busy on page 2-323
105 = Dial the other ex-
tension
Defines the next attendant message num-
ber or destination number for each 1-digit
access code in Automated Attendant serv-
ice 0
02 Destination Number Up to eight digits
Must be a valid ex-
tension number that
is programmed in
command 11-02 or
11-04.
No Setting
ISSUE 2.0 SL2100
Programming Manual 2-325
Program
25