NEC UNIVERGE SL2100, Programming Manual

Page: 468 / 678

Item
No.
Item Input Data Description Default
05 Message Backup/Go
Ahead Time 1 ~ 60 seconds (Msg Bkup/Adv Time)
Use this option to set the backup/ go
ahead time. This time sets how far InMail
backs up when a user dials
B while listen-
ing to a message. This interval also sets
how far InMail jumps ahead when a user
dials
G while listening to a message.
5 seconds
07 Digital Pager Callback
Number Digits
(12 maximum, using 0 ~
9,
# and
*
)
M (Number of messages
- entered by pressing
LK1 )
X (Extension number -
entered by pressing
LK2 )
InMail automatically re-
places the X command
with the number of the
extension that initially re-
ceived the message.
(Pager CBack)
Use this option to set the Digital Pager
Callback Number portion of the Message
Notification callout number for a digital
pager. This is the portion of the callout
number that is appended to the pager
service telephone number. Normally, this
option should be
X
*
M# , where:
• X is the number of the extension that
generated the notification.
•
*
is a visual delimiter (to make the pag-
er display easier to read).
• M is the number of new messages in the
extension mailbox.
• # is the digit normally used by the pager
service for positive disconnect.
X
*
M #
08 Delay in Dialing Digi-
tal Pager Callback
Number 0 ~ 99 seconds (Pager Dial Delay)
Use this option to set the delay (0 ~ 99
seconds) that occurs just before InMail di-
als the Digital Pager Callback Number por-
tion of the Message Notification callout
number for a digital pager.
Set this delay so the pager service has
enough time to connect to the digital pager
before sending the callback number.
Your pager service may be able to help
you determine the best value for this op-
tion (0 ~ 99 seconds).
By default, this option is 9 seconds. When
placing a digital pager notification, the sys-
tem: Seizes the trunk specified. Dials the
user-entered notification number (in
Mes-
sage + OP + N ).
Waits the 47-01-08: Delay in Dialing Digi-
tal Pager Callback Number interval.
Dials the number entered in 47-01-07:
Digital Pager Callback Number .
The system assumes that the notification
number completes dialing approximately 4
seconds after trunk seizure. This means
that, by default, the Digital Pager Callback
Number is dialed into the pager service
about 13 seconds after trunk seizure.
30 seconds
09 Wait Between Digital
Pager Callout At-
tempts 1 ~ 255 minutes (Notify Pager Intvl)
Use this option to set the minimum time (1
~ 255 minutes) between unacknowledged
or unanswered digital pager Message No-
tification callouts. (A subscriber acknowl-
edges a digital pager notification by log-
ging onto their mailbox.)
After this time expires, InMail tries the cal-
lout again (for up to the number of times
set in
47-01-14: Number of Callout At-
tempts ).
If the system dials the callout number and
the pager service is busy, it retries the
number in one minute.
15 minutes
SL2100 ISSUE 2.0
2-444 Program 47 : InMail
Program
47