NEC UNIVERGE SL2100, Programming Manual

Page: 215 / 678

Program 20 : System Option Setup
20-08 : Class of Service Options (Outgoing Call Service)
Level:
IN
Description
Use Program 20-08 : Class of Service Options (Outgoing Call Service) to define the outgoing call
feature availability for each extension Class of Service (COS).
Input Data
Class of Service Number 1 ~ 15
Item
No.
Item Input Data Description Default Related
Program
01 Intercom Calls 0 = Off
1 = On Turns off or on Intercom calling for
the extension.
COS 1 ~ 15 = 1
02 Trunk Outgoing
Calls 0 = Off
1 = On Turns off or on outgoing trunk calling
for the extension.
COS 1 ~ 15 = 1
03 System Speed
Dialing 0 = Off (Deny)
1 = On Turns off or on an extension ability
to make outbound calls using sys-
tem speed dial numbers.
COS 1 ~ 15 = 1
04 Group Speed Di-
aling 0 = Off (Deny)
1 = On Turns off or on an extension ability
to make outbound calls using group
speed dial numbers.
COS 1 ~ 15 = 1
05 Dial Number Pre-
view (Preset Dial) 0 = Off
1 = On Turns off or on an extension for us-
ing Dial Number Preview.
COS 1 ~ 15 = 1
06 Toll Restriction
Override 0 = Off
1 = On Turns off or on Toll Restricting Over-
ride (Service Code 663).
COS 1 ~ 15 = 0 21-01-07
21-07
07 Repeat Redial 0 = Off
1 = On Turns off or on an extension to use
Repeat Redial.
COS 1 ~ 15 = 1
08 Toll Restriction
Dial Block 0 = Off
1 = On Turns off or on an extension to use
Dial Block.
COS 1 ~ 15 = 1
09 Hotline/Exten-
sion Ringdown 0 = Off
1 = On Turns off or on Ringdown Extension
for extensions with this COS.
COS 1 ~ 15 = 1
10 Signal/Voice Call 0 = Off
1 = On Turns off or on an extension allow-
ing it to force Handsfree Answer-
back or Forced Intercom Ringing for
outgoing Intercom calls.
COS 1 ~ 15 = 1
11 Protect for the
Call Mode
Switching from
Caller 0 = Off
1 = On (Internal Call) COS 1 ~ 15 = 0
12 Department
Group Step Call-
ing 0 = Off
1 = On Turns off or on an extension to use
Department Group Step Calling.
COS 1 ~ 15 = 1
ISSUE 2.0 SL2100
Programming Manual 2-191
Program
20