Digital Proportional Radio Control System
FS-BS6
Receiver Overview
Connectors
Used to connect to the model and servos.
The FS-BS
４
receiver has a gyroscope SVC function that can be used to improve handling.
Binding
1.
Insert the bind cable into the receivers BIND port;
2.
Plug the power cable into any other port, and the receiver's LED will start to flash quickly indicating that it
has entered bind mode.
Status Indicator
The status indicator is used to indicate the power and working status of the receiver.
• Off: The power is not connected.
• Lit in red: The receiver is on and working.
• Flashing quickly: The receiver is binding.
• Flashing slowly: The bound transmitter is off or signal is lost.
Antenna
CH 1-6
Bind/VCC
LED
FS-BS4
•
CH1 to CH4: used to connect the servos, power or other parts.
•
BIND/VCC: used to connect the bind cable for binding, and the power cable during normal operation.
•
SERVO: used to connect i-Bus module and extend channels.
•
SENS: used to connect all kinds of sensors.
