![background image](http://html.mh-extra.com/html/nec/univerge-neax-2000-ips/univerge-neax-2000-ips_installation-manual_251421061.webp)
CHAPTER 1 GENERAL INFORMATION
– 45 –
NWA-008841-001 Rev.5.0
90ch1001.fm
MOUNTING CONDITIONS OF CIRCUIT CARDS
This section explains the conditions for mounting circuit cards used in the system.
Circuit Card Mounting Slots
(1) Regular PIM
Circuit Card Mounting Slots
*1
PN-CP24-A/CP24-B/CP24-C/CP24-D (MP) card is to be mounted in the MP12 slot of PIM0.
PZ-M606-A (ETHER) card is to be mounted on the PN-CP24-A/CP24-B/CP24-C/CP24-D (MP)
card.
PN-CP15 (FP) card is to be mounted in the FP12 slot of PIM2, 4, 6 according to the system con-
figuration.
LT00-LT11 : Line/Trunk card mounting slots
AP00-AP11 : Application Processor card
mounting slots
MP12
: PN-CP24-A/CP24-B/CP24-C/CP24-D
mounting slot
FP12
: PN-CP15 mounting slot
VM
: PZ-VM00/VM00-M/VM03-M/VM10-M mounting slot
PFT
: PZ-8PFTB mounting slot
AC/DC PWR : PZ-PW121/PW126 mounting slot
When using the A361 PIM-DC (PIM for –48 V
DC power supply system), this slot is used for
DC/DC PWR (PZ-PW135 mounting slot).
DC/DC PWR : PZ-PW122 mounting slot
When using the A361 PIM-DC (PIM for –48 V
DC power supply system), this slot is not used.
LT09/AP09
LT08/AP08
LT07/AP07
LTC1
LTC0
LTC2
BWB
FRONT
AC/DC
PWR
LT10/AP10
LT00
/A
P00
LT01/AP01
LT02/AP02
LT03/AP03
LT04/AP04
LT05/AP05
LT06/AP06
LT
11/AP11
MP
1
2/FP12
LTC3
DC/DC
PWR
PF
T
VM
*
2
*
1
PIM
0 - 7
*
3
JULY/1/2006
MOUNTING CONDITIONS OF CIRCUIT CARDS