CHAPTER 1 GENERAL INFORMATION
– 17 –
NWA-008841-001 Rev.5.0
90ch1001.fm
EQUIPMENT NAME AND FUNCTION
This section explains the names and functions of the equipment (modules, installation hardware, circuit
cards) used in the system.
Module/Installation Hardware
This table shows the names and functions of the modules.
Module Name and Function
Continued on next page
EQUIPMENT
NAME
FUNCTIONAL
NAME
FUNCTION
SN1617
PIMMD
PIM
Port Interface Module (PIM)
Maximum 64 physical ports per PIM.
Houses two batteries for protection from short power interruption
(for 30 minutes).
At maximum configuration, the system consists of eight PIMs,
and provides a total of 512 physical ports (64 ports
×
8).
SN1663
PIMMG
[For EU]
PIM
Port Interface Module (PIM)
Maximum 64 physical ports per PIM.
Houses two batteries for protection from short power interruption
(for 30 minutes).
At maximum configuration, the system consists of eight PIMs,
and provides a total of 512 physical ports (64 ports
×
8).
SN1658
PIMMF
PIM
Port Interface Module (PIM) for Backup CPU System
Maximum 64 physical ports per PIM.
Houses two batteries for protection from short power interruption
(for 30 minutes).
One PIM is required per Backup CPU System.
SN1664
PIMMH
[For EU]
PIM
Port Interface Module (PIM) for Backup CPU System
Maximum 64 physical ports per PIM.
Houses two batteries for protection from short power interruption
(for 30 minutes).
One PIM is required per Backup CPU System.
NOVEMBER/15/2006
EQUIPMENT NAME AND FUNCTION