![background image](http://html.mh-extra.com/html/nec/univerge-neax-2000-ips/univerge-neax-2000-ips_installation-manual_251421245.webp)
– 229 –
NWA-008841-001 Rev.5.0
90ch2002.fm
<REC Control>
This item specifies the operation mode of a recording equipment. The following two types of
modes are available:
Manual mode:
Manual mode is available when the recording equipment has a remote connection function.
When the REC key is pressed, the system starts recording. When the REC key is pressed again,
the recording stops.
Automatic mode:
In automatic mode, the system starts/ends recording automatically when a call is connected/
disconnected. Note that the REC key is not effective in Automatic mode.
STEP1:
Display Configuration Menu P2.
Page 221
STEP2:
Press the numeric key 1 (REC CONTROL).
STEP3:
Press the desired numeric key. An asterisk (*) shows the selected number.
1.
Manual mode
2.
Automatic mode
STEP4:
Press the SRC key. The display returns to Configuration Menu.
STEP5:
Press the Answer key to update the configuration data.
Page 225
When canceling update, press the Release key.
When specifying other item, press the DEST key.
When returning previous item, press the SRC key.
[CONFIG MENU P2] VER x
SRC: prev page
1: REC CONTROL
DEST: next page
2: PAGE CONTROL
Release: exit
3: SUP CONNECTION
Answer: update
[REC CONTROL]
SRC: menu
* 1: MANUAL
2: AUTO
Default setting:
“1:MANUAL”
[CONFIG MENU P2] VER x
SRC: prev page
1: REC CONTROL
DEST: next page
2: PAGE CONTROL
Release: exit
3: SUP CONNECTION
Answer: update
SN716 DESKCON (DLC)