– 231 –
NWA-008841-001 Rev.5.0
90ch2002.fm
<Hold/Start/Release Swap>
This item specifies the locations of Hold, Start, and Release key.
STEP1:
Display Configuration Menu P3.
Page 221
STEP2:
Press the numeric key 3 (HOLD/START/RELEASE SWAP).
STEP3:
Press the desired numeric key. An asterisk (*) shows the selected number.
1.
Original setting
2.
Swapped setting
NOTE
NOTE:
The locations of each key changes as shown below.
STEP4:
Press the SRC key. The display returns to Configuration Menu.
STEP5:
Press the Answer key to update the configuration data.
Page 225
When canceling update, press the Release key.
When specifying other item, press the DEST key.
When returning previous item, press the SRC key.
[CONFIG MENU P3] VER x
SRC: prev page
1: REC VOLUME
DEST: next page
2: BLF
Release: exit
3: HOLD/START/RELEASE SWAP Answer: update
[HOLD/START/RELEASE SWAP] SRC: menu
* 1: ORIGINAL
2: SWAPPED
Default setting:
“1:ORIGINAL”
ORIGINAL SETTING
SWAPPED SETTING
Hold
Start
Start
Release
Release
Hold
[CONFIG MENU P3] VER x
SRC: prev page
1: REC VOLUME
DEST: next page
2: BLF
Release: exit
3: HOLD/START/RELEASE SWAP Answer: update
SN716 DESKCON (DLC)