NEC POWERMATE ENTERPRISE - 09-1997, Manual

Page: 105 / 284

Using Tools and Utilities 4-25
Exit Menu
Selecting “Exit” from the menu bar displays the following
exit options.
„
Exit Saving Changes
Choose this option if you wish to save any changes made
and exit the Setup program.
„
Exit Discarding Changes
Choose this option if you wish to exit the program
without saving any changes made.
„
Load Setup Defaults
Choose this option if you wish to load the original
system BIOS default settings.
„
Load Custom Defaults
Choose this option to load previously saved user
settings.
„
Save Custom Defaults
Choose this option to save any changes as custom
defaults. Normally, the BIOS reads the setup parameters
from CMOS, but if your CMOS fails, the BIOS will
read the custom defaults (if you set them). If not, the
BIOS uses the factory default settings.
„
Discard Changes
Choose this option if you wish to discard any changes
made in the current session, but want to continue to
enter new changes.
Maintenance Menu
The Maintenance Menu only appears when the system
board has been jumpered for Configure mode. When the
system is restarted in Configure mode, the Setup Utility
comes up in the Maintenance Menu. Other selections are the
Main, Power Management, Security, Boot, and Exit menus.