NEC POWERMATE ENTERPRISE - 09-1997 Manual Download Page 206

Page: 206 / 284

Installing Options 5-75

Connecting an External SCSI Device

Connect an external SCSI device to a minitower system as
follows:

NOTE

Before connecting an external SCSI device

to the system, be sure the device is set up correctly.
Follow the instructions that come with the option.

Turn off power to the system and to the SCSI device.

Connect one end of the SCSI cable to the SCSI
connector at the rear of the system unit.

Connecting an external SCSI device cable to a minitower computer

Connect the other end of the cable to either of the SCSI
connectors on the SCSI device.

See the documentation that comes with the device for
instructions on whether, or how, to terminate the device.

Summary of Contents for POWERMATE ENTERPRISE - 09-1997





























































































































































































































































































Search results

Summary of Contents for POWERMATE ENTERPRISE - 09-1997

Reviews:

Related manuals for POWERMATE ENTERPRISE - 09-1997

Brands by name

Popular brands

NEC POWERMATE ENTERPRISE - 09-1997, Manual

Search results

Summary of Contents for POWERMATE ENTERPRISE - 09-1997

Reviews:

Related manuals for POWERMATE ENTERPRISE - 09-1997

Brands by name

Popular brands