NEC POWERMATE ENTERPRISE - 09-1997, Manual

Page: 99 / 284

Using Tools and Utilities 4-19
3.
With the password field selected, press
Enter
.
„
If you are setting a password for the first time, Setup
displays a dialog box with the following prompts:
Enter new password: [ ]
Confirm new password: [ ]
Type your password (passwords are not case
sensitive) and press
Enter . Reenter your password
and press
Enter
again.
NOTE
The cursor changes to magenta during
password entry. The characters you enter do not
appear on your screen.
„
If you are changing a password, Setup displays a
dialog box with the following prompts:
Enter current password: [ ]
Enter new password: [ ]
Confirm new password: [ ]
Type your current password and press
Enter
. Type
your new password and press
Enter
. Reenter your
new password and press
Enter
again.
4. Use the left or right arrow key to select Exit .
5.
Use the up or down arrow key to select
Exit Saving
Changes
. Press
Enter
.
6. At the prompt asking you to confirm that you wish to
exit Setup, press
Enter
.
Your password takes effect the next time you power on
the system. The next time you power on you will be
prompted for a password. You must enter a password to
access the system.