NEC POWERMATE ENTERPRISE - 09-1997, Manual

Page: 98 / 284

4-18 Using Tools and Utilities
When both the User Password and Supervisor Password are
enabled, only the Supervisor Password gives you full access
to all Setup fields.
Supervisor Password Is
This read-only field indicates whether a Supervisor
Password has been set. This field can be either “Clear” or
“Set.” The default is “Clear” (no password has been set).
When both the User Password and Supervisor Password are
Enabled, only the Supervisor Password gives you full
access to all Setup fields.
Set User or Supervisor Password
The password fields allow you to establish a user-level
password or supervisor-level password. Once the password
is established, it must be entered to access Setup during
POST.
Use the following procedure to set a password.
1. Using your left or right arrow keys, select Security from
the menu bar. The Security menu appears.
2.
Select
Set Supervisor Password
or
Set User
Password with the up or down arrow keys.
NOTE
Once the Supervisor Password feature is
enabled, the Setup Utility can only be accessed by
entering the password.