NEC POWERMATE ENTERPRISE - 09-1997, Manual

Page: 214 / 284

Setting Jumpers 6-7
9.
Power on the system unit and monitor. The Setup
Utility screen appears automatically after POST, and
no password is required. In Configure Mode, the Setup
Utility Main Menu has a Maintenance menu item in
addition to the others. Select the Maintenance menu.
10.
Clear All Passwords is highlighted by default when the
Maintenance menu is active. Press
Enter .
11.
A Setup Confirmation window appears with the
prompt, “Clear All Passwords Now?” The default is
Yes. Press the left or right arrow key to toggle between
Yes and No. Select
Yes and press Enter to activate the
choice.
12.
Turn off the computer and unplug the system unit and
monitor.
13. Remove the system unit cover.
14.
Remove the system board.
15. Return the jumper block to the Normal Operation
position (pins 1-2). NECCSD recommends using
needle-nose pliers to move a jumper.
16.
Replace the system board.
17. Replace the system unit cover.
18.
Reconnect the system and monitor power cables and
peripheral devices.
19. Power on the system unit and monitor.
20.
Run Setup to set a new password (see “The Setup
Utility” in Chapter 4).