manualshive.com logo in svg

NEC NEAX 7400 IMX, Command Manual

Share
Download
NEC NEAX 7400 IMX Command Manual Download Page 714

ND-70348 (E)

CHAPTER 4

Page 675

Revision 3.0

ALRTN

ALRTN: Assignment of Logical Route for NDM

1. General

This command is used to allocate the Logical Route Number which is the unique number of the external trunk
route in the Netfusing Network.

2. Precautions

1.

Logical Route Number allocation is required for the Netfusing Network only.

2.

When assigning the data by this command, the Route Class Data (ARTD) and Trunk Application Data (AR-
TI) for Physical Route are also allocated to Logical Route Data (ARTDN/ARTIN) on the same condition.

3.

For more detailed information, see the “Netfusing System Manual”.

3. Data Entry Instructions

NUMBER (LGRT)

LOGICAL ROUTE    FUSION POINT

CODE (FPC)

1-253

EXTERNAL ROUTE

NUMBER (RT)

1-255

REMARKS

1-899

Assign all external routes including
dummy routes in the Netfusing Network.

RT

FPC

Assign FPC of each node to
which the external trunk route
belongs.

    LGRT

LGRT is the unique number allocated
to each external trunk route in the Netfusing 
Network.

Summary of Contents for NEAX 7400 IMX


























































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands