ND-70348 (E)
CHAPTER 4
Page 414
Revision 3.0
ARTDN
LGRT
1-899
FUNCTION
REMARKS
13
AC
Flexible Routing Pattern Designation
When outgoing route selection pattern number is to be determined
by the AFRS command, “1” is to be assigned if the Access Code is
included in the Number Pattern Code (NPC).
0= When flexible routing is executed, numbers are translated exclud-
ing the Access Code.
1= When flexible routing is executed, numbers are translated includ-
ing the Access Code.
This data is valid for dummy
routes.
Assign data "1" for the dummy
route.
14
TNT
Tenant Number Check
0 = Tenant number check is not required in trunk selection.
This data should always be as-
signed as “0”
15
LSG
Line Signal
0= Loop
1= Ground Start
C. O. Line
2= CDH
3= Caller ID (Loop)
4= Loop
5= E&M
Tie Line
6= DX
7= 24V4
8= Loop DID
9-11= Not used
12= Speech Line ( for CCIS No.7 or Bch of ISDN)
13= Signal Line ( for CCIS No.7 or Dch of ISDN)
14= Not used
15= Not used
16
SMDR2
Detailed Billing Information
See Figure 4-16 (Next Page)
and Table 4-22
.
17
H/M
Hotel Service in CCIS No.7
0= Out of Service
1= In Service
18
MC
0
0
0
0
Always assign data “0”.
19
ANI E911-ANI
Service
0= Out of Service
1= In Service
20
D
0
0
0
0
Always assign data “0”.
21
MSB
0
0
0
0
Always assign data “0”.
22
MSW
0
0
0
0
Always assign data “0”.
23
TR
0= -
1= ICPT transfer by group-II signals used.
For MFC signaling.
