manualshive.com logo in svg

NEC NEAX 7400 IMX, Command Manual

Share
Download
NEC NEAX 7400 IMX Command Manual Download Page 323

ND-70348 (E)

CHAPTER 4

Page 318

Revision 3.0

AABD

AABD: Assignment of Speed Calling Restriction Data

1. General

This command is used to assign the Speed Calling system Restriction Data. This data is added to the Service
Feature Class of an individual station assigned to the Speed Calling system in order to restrict it from originating
calls.

2. Precautions

1.

The Abbreviated Digit Codes (ADC) should already be assigned by the ASPD command.

2.

 The Speed Calling Override Service must be assigned by the ASYD command, SYS2, Index1, b6=1.

3.

 The applicable tenant number (TN) range is designated by the ASYD command, SYS1, INDEX8. 

3. Data Entry Instructions

0       1       2       3       4        5       6       7       8       9     10     11      12     13     14     15   

RESTRICTION DATA (RES) is assigned the 
squares where ADC and SFC cross.  When 
unassigned, RES or the corresponding item is 
recognized as “0” (Restricted).
  0 = Connection is restricted
  1= Connection  is allowed

RES

SPEED 

CALLING

 CODE (ADC)

MAX. 4
DIGITS

TENANT

NUMBER

(TN)

SERVICE FEATURE CLASS (SFC)

ADC

 The Abbreviated Digit Codes (ADC) corresponds
to the data assigned by the ASPD command.

Summary of Contents for NEAX 7400 IMX


























































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands