manualshive.com logo in svg

NEC NEAX 7400 IMX, Command Manual

Share
Download
NEC NEAX 7400 IMX Command Manual Download Page 365

ND-70348 (E)

CHAPTER 4

Page 360

Revision 3.0

ADSL

ADSL: Assignment of D

term

 Soft Key on LCD Data

1. General

This command is used to create an additional soft key pattern (for D

term

 75). 

2. Precautions

1.

Four soft keys appear on a D

term

 75, and those soft keys have four pages. This allows each soft key to have

four different functions, and a station user may turn the soft key pages over by simply pressing the page
scroll key (which may be indicated “>>>”). 

2.

The soft key allows different functions to be assigned depending on the call status of the D

term

 75 station. 

3.

This command creates the maximum of 16 customized key patterns.

Note:

Available for the software release 5 or later. 15 patterns at the maximum (SKP=0 is not used) for the earlier
released than the above-mentioned software.

4.

SKN (Soft key number) is the guide number to assign the function data (FKY) onto each soft key of all the
pages. SKN within a soft key pattern (SKP) is illustrated in Figure 4-12.

Figure 4-12   Soft Key Pattern

11:20      AM           WED       16           APR        1997

MIC              DND                                                >>>

23456789

SOFTWARE KEY PATTERN

(SKP)

SN = 0 (Idle)

PAGE 0

PAGE 1

PAGE 2

PAGE 3

SKN 0

SKN 4

SKN 8

SKN 12

SKN 1

SKN 5

SKN 9

SKN 13

SKN 2

SKN 6

SKN 10

SKN 14

SKN 3

SKN 7

SKN 11

SKN 15

SN = 6 (Trunk busy, BT connection)

PAGE 0

PAGE 1

PAGE 2

PAGE 3

SKN 0

SKN 4

SKN 8

SKN 12

SKN 1

SKN 5

SKN 9

SKN 13

SKN 2

SKN 6

SKN 10

SKN 14

SKN 3

SKN 7

SKN 11

SKN 15

•

•

•

SN= 0
(Idle)
SN= 1
(Originating, DT connection)
SN= 2
(Originating, RBT connection)
SN= 3
(Called station busy, BT connection)
SN= 4
(Communication in progress)
SN= 5
(Consultation Hold, Controlling Station)
SN= 6
(Trunk busy, BT connection)
SN= 7 
Not used
SN= 8

Note 2

(Consultation Hold when Called 
Station is Busy - Controlling Station)
SN= 9

Note 2

(3-party Conference call)
SN=15
(Others)

Note 1

Note 1

Note 1:

Available only for the Station to which Busy Service is applied.

Note 2:

Available for software Release 9 or later.

Summary of Contents for NEAX 7400 IMX


























































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands