2. BMC Configuration
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
226
Chapter 3 Useful Features
Item Description
Default
Value
Separate
Setting
: You can arbitrarily select the event and the address
(To:X) to alert in each sensor type.
Alert Test
Execute test by sending an alert by setup content and
mail.
*11
－
*1: When Mail Alert is enabled, at least one address should be enabled.
*2: Can be specified only when To: X is set to "Enable".
*3: Up to 255 characters including alphanumeric, hyphen, underscore, period, and @ (at mark) can be used.
*4: Up to 63 alphanumeric characters exc, ", ?, =, <, >, #, and \ can be used.
*5: Up to 255 alphanumeric characters, hyphen, underscore, and period can be used for full domain name or IP
address.
*6: Can be specified only when SMTP Authentication is set to "Enable".
*7: When SMTP Authentication is set to "Enable", at least one of the authentic methods should be enabled.
*8: Up to 64 alphanumeric characters excluding " " blank, ",?, =, <, >, #, and \, can be used.
*9: Up to 20 alphanumeric characters excluding " " blank, ",?, =, <, >, #, and \, can be used.
*10 Can be specified only when SMTP Alert is set to "Enable".
*11: Be sure to perform Alert Test after all the parameters are configured appropriately. Alert feature may fail
depending on configuration made for network or alert receiver.
Tips
If you use Japanese keyboard and select "JAPANESE - Keyboard" at the chapter "2.2
Activating BMC Configuration", you can input underscore(_) by pressing <Shift> + <^> key.
