11. System Diagnostics
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
110
Chapter 1 Maintenance
2. After making sure that periphery cables (except power calble) are removed, run EXPRESSBUILDER and
choose
Tool menu
from Boot Selection Menu.
For more information, see
Chapter 3 (5. Details of EXPRESSBUILDER)
.
Note
Choose
English
if
Language selection menu
appears.
3. Choose
Test and diagnostics
. Shows the following three menus.
End-User Mode (Basic)
Run basic System Diagnostics.
When this menu selected, the process start automatically. Then it takes about three minutes.
When the diagnostics is completed, the screen display changes as shown below.
End-User Mode (Professional)
Run detail System Diagnostics.
When this menu selected, shows the screen of Device List(End-User Pro).
See
eupro_ug_en.pdf
in the \isolinux\diag folder of EXPRESSBUILDER for the
End-User Mode
(Professional)
feature.
After System Diagnostics are completed, perform Step 6 of this procedure.
Supervisor-Mode
This menu is intended for maintenance personnel.
Do not run this menu.
End-User Mode (Basic) (After the System Diagnostics)
Diagnostics tool title
Shows the name and version of the diagnostic tool.
Test window title
Shows the progress of the diagnostics. “Test End” is displayed when the diagnostics completes.
Test results
Shows the start, end, and elapsed time and completion status of the diagnostics.
Test window title
Test results
Test summary window
Guideline
Diagnostics tool title
