3. Duplex LAN Configuration
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
143
Chapter 2 Configuring and Upgrading the System
6.
Click
Additional properties
.
Specify the required settings, and then click
OK
.
Teaming mode
Static Teaming
Configures static aggregation between the NIC and switches.
Switch Independent
Configures teaming on the NIC side without depending on the switch
settings.
LACP
Configures dynamic aggregation between the NIC and switches.
Important Select other than Static Teamin for teaming mode when connecting 100Mbps or
10Mbps.
If select Static Teaming and connect with 100Mbps or 10Mbps, network
communication may be disabled when the module degraded.
Load balancing mode
Address Hash
Distributes the load based on IP addresses and port numbers.
Hyper-V Port
Distributes the load to each of the virtual switch ports used by the
virtual machines.
Dynamic
Distributes the load based on IP addresses and port numbers in
sending.
Distributes the load same to "Hyper-V Port" in receiving.
Standby adapter
Select one adapter to be set to standby mode from the adapters in the team.
Setting all adapters to active mode is also possible.
