2. BMC Configuration
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
221
Chapter 3 Useful Features
Item Description
Default
Value
IPv6 Property
IPv6
Enable or disable IPv6.
*2
Disable
Address
Assignment
Mode
Specify the mode to assign IPv6 address (Static or Dynamic).
*2 *7
Dynamic
Link Local Address
Display link local address.
*7 *8
－
Global Address
Display IPv6 address when Dynamic is specified for assignment
mode.
*7 *8
－
Static Address
Specify IPv6 address when Static is specified for assignment mode.
*7
Setting "::" or "0::0" as Static Address, and when redisplaying this
screen , this item is set as 0.
0::0
Prefix Length
Specify the prefix length when Static is specified for assignment
mode.
*2 *7
Setting this address different as prefix of Static Address, and when
redisplaying this screen, this item is set as "::".
64
Gateway Address
Specify the gateway address when Static is specified for
assignment mode.
*2 *7
0::0
DNS Server Address
Specify the DNS Server.
*7
0::0
Access Limitation
Limitation Type
Select the Access Limitation Type.
Allow All
: Access to BMC is not limited.
Allow Address
: Specify the IP Address that is allowed to access BMC.
Deny Address
: Specify the IP Address that denies accessing BMC.
Allow All
IP Address
Specify the IP Address to allow or deny to access with BMC.
*9
*10
Blank
Service
HTTP
Enable or disable HTTP service.
*11
Enable
HTTP Port Number
Specify the HTTP port number.
*12
80
HTTPS
Enable or disable HTTPS service.
*11
Enable
HTTPS Port Number
Specify the HTTPS port number.
*12
443
SSH
Enable or disable SSH service.
Enable
SSH Port Number
Specify the SSH port number.
*12
22
*1: If an illegal value is specified for subnet mask, an error message is displayed and setting is disabled.
*2: It should be same settings for CPU/IO module 0 and CPU/IO module 1. When the settings is different, the
settings of primary module is preferentially. In addition, this rule is applied to the BMC Configuration for
Windows.
*3: Can be changed only when DHCP is set to "Disable".
*4: Can be changed only when DHCP is set to "Enable".
*5: Host Name should be within 63 characters.
Acceptable characters are: alphanumeric, hyphen (-), underscore (_), and period (.).
*6: Host Name and Domain Name should be within total of 255 characters.
Acceptable characters are: alphanumeric, hyphen (-), underscore (_), and period (.).
*7: Can be specified only when IPv6 is set to "Enable".
*8: Displayed only when "Dynamic" is specified for Address Assignment Mode.
*9: Can be specified when Access Limitation Type is "Allowed Address" or "Deny Address". The length must not
exceed 255 characters.
*10: The range of IP addresses to "Allow" or "Deny" access is delimited by ", (Comma)". With regard to the setting
of “Deny” access, "*(Asterisk)" can be described as a wild-card. (ex: 192.168.1.*,192.168.2.1,192.168.2.254)
