NEC EXPRESS 5800 ES1400 SERIES Online, Online Service Manual

Page: 162 / 198

System Setup Utility B-11
Recommended Resource Settings
The following table shows the recommended RCA system board settings for a sample
system and provides a place for you to record any changes you make to the settings.
SYSTEM GROUP NORMAL SETTING
YOUR
CONFIGURATION
System Identification and Version Information
SSU Configuration File Version Display Only
MP Spec. Version V 1.4
Processor Speed Setting 3.5 X Bus Speed
MEMORY SUBSYSTEM GROUP
Extended Memory Options Use BIOS Setup Utility
ON-BOARD DISK CONTROLLER GROUP
On-board Floppy Controller Enable
On-board IDE Controller Enable Primary and
Secondary
ON-BOARD COMMUNICATIONS DEVICE GROUP
Serial Port 1 Configuration 3F8h – IRQ4
Serial Port 2 Configuration 2F8h – IRQ3
Parallel Port Configuration 378h – IRQ7
Parallel Port Mode Extended Capabilities, Port
DMA 1
FLOPPY DRIVES GROUP
Floppy Drive A Option 3.5 1.44/1.25 MB Drive
Floppy Drive B Option Disabled or not installed
IDE DEVICES GROUP
IDE 32-Bit I/O Enable
KEYBOARD GROUP
Numlock OFF
Key Click Disable
Typematic Speed 30CPS
Typematic Delay 500 MS Delay
SCSI ROM BIOS GROUP
Embedded SCSI Devices Option ROM
Scan
Enable
System Resource Usage
Clicking on the Resource Use button in the Configuration window displays the System
Resource Usage window. This window shows what resources each device is consuming.
This information is useful for choosing resources if a conflict occurs. Devices can be
organized according to the resources the user wants to examine using the options in the
Resource section of the screen.