NEC EXPRESS 5800 ES1400 SERIES Online, Online Service Manual

Page: 123 / 198

5-14 Problem Solving
8. Press
Enter
to display the option menu.
9.
Select
Enable
and press
Enter
.
10.
If you are finished editing the settings for the system board, press
Esc
. This takes you back up
to the main menu, Step 3.
11.
Press
Esc
again to return to the main SSU menu.
12.
Select Step 4, Save Configuration. Once you select this step, the changes are immediately saved
into an INF file, a CMS file, and nonvolatile memory.
13.
Press
Esc
to exit the SSU. You will be prompted to reboot the system or simply exit to the
command line prompt. You’ll need to reboot the system to let your changes take effect, but
first
remove the SSU diskette drive.
Then
press
F10
to reboot.
You should now see the
F2
prompt displayed at bootup.