NEC EXPRESS 5800 ES1400 SERIES Online, Online Service Manual

Page: 46 / 198

Configuring Your System 3-13
System Management Submenu
Feature Choices Description Your Setting
Sever Management Info
Press
ENTER
Refer to “System Management Info Submenu.”
System Event Logging Disabled
Enabled
When enabled, system events will be logged by
BIOS and BMC.
Clear Event Log
No
Yes
Yes clears the system event log (SEL) in BMC.
EMP Password switch
Disabled
Enabled
Enables EMP password.
EMP Password
[A…Z, 0 9]
This field only shows up when EMP password is
enabled.
EMP ESC Sequence Refer to Appendix B.
EMP Hangup Line String Refer to your modem
documentation.
Modem Init String Refer to your modem
documentation.
High Modem Init String Refer to your modem
documentation.
EMP Access Mode Pre-boot Only
Always Active
Disabled
Pre-boot Only - EMP is only enabled during power
down through power up to the end of POST. Com 2
is returned to system use at the end of Post when
operating system boots.
Always Active - EMP is always enabled. Com 2
cannot be used by operating system. It is now
dedicated for EMP use.
Disabled - EMP is disabled. Com 2 is always
available for system use by console redirection or
operating system
EMP Restricted Mode Access
Disabled
Enabled
If set to Enabled, Power on/off and Reset server
controls via EMP are no longer available.
EMP Direct Connect/Modem
Mode
Direct Connect
Modem Mode
Sets how EMP connects to the server. Direct Connect
means a null modem serial cable directly connects
COM 2 connector port to the EMP console machine.
Modem mode indicates that a modem is connected
on COM 2 for EMP use.