NEC EXPRESS 5800 ES1400 SERIES Online, Online Service Manual

Page: 154 / 198

System Setup Utility B-3
Creating SSU Diskettes
SSU may be run directly from the E
XPRESS
B
UILDER
CD-ROM or from DOS-bootable
diskettes. Before you can run the SSU from diskettes, you must copy the SSU from the
E
XPRESS
B
UILDER
CD-ROM to a diskette.
If your diskette drive is disabled, or improperly configured, you must use the FLASH-
resident BIOS Setup Utility (F2) to enable it so that you can use the SSU. If necessary, you
can disable the drive after you exit the SSU. Information entered using the SSU overrides
information entered using Setup.
1.
Power on the system.
2. If the diskette drive is disabled, enable it using the BIOS Setup Utility, explained later
in this chapter. Specify the correct type of diskette drive.
3.
Using the E
XPRESS
B
UILDER
CD-ROM, create the SSU diskette.