NEC Electra Elite 192, Hardware Manual

Page: 66 / 369

Issue 6 Electra Elite
1 - 14 Introduction
Terminals
DCU-60-1(BK)/(WH)
CONSOLE
This Attendant Console is equipped with 60
programmable line keys (each with 2-color LED).
Twelve keys can be programmed as Feature
Access keys and 48 keys can be programmed as
Direct Station Selection or outside line keys.
4
DP-D-1A
This Doorphone may be used when
DPH(4)-U10 ETU is installed.
4
DTP-1-1(WH) TEL
DTP-1-2(WH)/(BK)
TEL
This Single Line Telephone is a fully modular
terminal with a flash key, Redial key, 3-level receive
volume control, 2-level ring volume control, data
jack, and message waiting lamp.
Each terminal requires an SLI(4)/(8)-10 ETU or
SLT(1)-U10 ADP.
56 118 118
DTP-1HM-1(WH)
TEL
DTP-1HM -2
(WH)/(BK) TEL
This Single Line Telephone is a fully modular
terminal with a flash key, Redial key, 3-level receive
volume control, 2-level ring volume control, data
jack, message waiting lamp, and eight
programmable Feature/Speed Dial keys.
Each terminal requires an SLI(4)/(8)-U10 ETU or
SLT(1)-U10 ADP.
48 112 112
DTP-2DT-1(WH)
TEL
This is a fully modular terminal with two Flexible
Line keys (each with 2-color LED), eight function
keys, built-in Speakerphone, and a large LED to
indicate incoming calls and messages.
This phone does not support any adapter.
Each terminal requires an ESI(8)-U10 ETU.
56 118 118
DTU-4R-1(BK) TEL
This D
term
Cordless Lite Terminal can be connected
to the Electra Elite System using a tandem
connection to a Multiline Terminal. The terminal
has a 16-digit, 2-line LCD, dial pad, talk key, chan
key, hold key, transfer key, conf key, mute key, vol
key, a msg icon, vibrator, and four function keys
with red LEDs.
The cordless terminal can be switched to the
Multiline Terminal connected to it by pressing the
Desk key on the base unit of the idle D
term
Cordless
Lite Terminal.
30
Equipment Name Description Basic KSU
Basic + 1
Expansion
KSU
Basic + 2
Expansion
KSUs