NEC Electra Elite 192, Hardware Manual

Page: 12 / 369

System Hardware Manual 1
GENERAL
INFORMATION
Established Federal Communications Commission (FCC) rules permit this
telephone system to be directly connected to the telephone network. A jack is
provided by the telephone company. Jacks for this type of customer provided
equipment are not provided on party lines or coin lines.
The telephone company may change technical operations and procedures.
When such changes affect the compatibility or use of the Electra Elite system,
the telephone company is required to give adequate notice of the changes.
COMPANY
NOTIFICATION
Before connecting this telephone system to the telephone network, the
following information must be provided to the telephone company:
1. Your telephone Number.
2. FCC registration number:
When the system is to be installed as a Key Function system (no dial
access to Trunk Groups/Route Advance Blocks), use the following
number:
AY5THA-24363-KF-E
When the system is to be installed as a Multifunction system, use the
following number:
AY5THA-24361-MF-E
When the system is to be installed as a PBX system, use the
following number:
AY5THA-24362-PF-E
Ringer Equivalence Number (REN): 2.0B
USOC jack required: RJ21X
Regulatory Information