NEC Electra Elite 192, Hardware Manual

Page: 233 / 369

Electra Elite Issue 6
System Hardware Manual 5 - 87
5.9.3 Switch Settings
Refer to Table 5-25 VMS(2)/(4)/(8)-U10 ETU Switch
Settings . For Revision Q00631 v 6.68 or Higher, refer to
Table 5-26 VMS DIP Switch Functions .
Table 5-25 VMS(2)/(4)/(8)-U10 ETU Switch Settings
Switch Description
1 Normally Off
(On to enable COM1)
2 Normally Off
When 1 and 2 are both On, COM1 is enabled
for HOSTKEY and the VM application is
stopped for Maintenance.
3 On to enable COM2 for remote
RS-232/RJ-11.
Off to allow COM1 local connection.
4 Not Used
Table 5-26 VMS DIP Switch Functions
DIP
1
DIP
2
DIP
3
DIP
4
Description
ON To enable HostKey and run Manufacturing Test
(NEC Production only
ON ON To enable HostKey with floppy disk redirection and
run Manufacturing Test (NEC Production only
ON To connect to CoSession using modem instead of
direct cable connection
ON To start BRU Host with direct cable connection
ON ON To start BRU Host with modem connection
ON ON To connect to CoSession using direct cable
connection but not start voice mail software
(Troubleshooting or Maintenance Mode)
Used for Revision Q00631 v 6.68 or Higher