NEC Electra Elite 192, Hardware Manual

Page: 231 / 369

Electra Elite Issue 6
System Hardware Manual 5 - 85
5.9.2 Installation
Only one VMS(2)/(4)/(8)-U10 ETU can be installed in
each system in any S1~S8 slot in any system KSU.
The system can have one FMS(2)/(4)/(8)-U10 ETU or one
CTI/VP(4)/(8)/(12)/(16)-U10 ETU in place of VMS.
Table 5-24 Configuration Support Tab le
Function Configuration Support
Applications Automated Attendant/Voice Mail with call
forwarding (release transfer)
Automated Attendant/Voice Mail without call
forwarding (await answer transfer)
Voice Mail only (No transfer)
Call Forwarding Supported
Connections Connects to backplane connector of the KSU
Hardware One VMS
(2)/(4)/(8)
-U10 ETU
Message Notification Through message waiting lamps
Operator Console 100 (default)
Positive disconnect: Digital Signal
Telephone One of the following telephones is required to
program Electra Elite System data:
DTP-8D-1(BK)/(WH) TEL
DTU-8D-2(BK)/(WH) TEL
DTP-16D-1(BK)/(WH) TEL
DTU-16D-2(BK)/(WH) TEL
DTP-32D-1(BK)/(WH) TEL
DTU-32D-2(BK)/(WH) TEL
ETW-16DC-1/2(BK)/(SW) TEL
ETW-16DD-1/2(BK)/(SW) TEL
ETW-24DS-1/2(BK)/(SW) TEL
DSP-F-21 Unit Adds four additional voice mail ports
Required by VMS(8)-U10 ETU
MDM-F-20 Unit Used for remote connection