Daily Maintenance
Operation Instructions Rockhopper Printer
Page
62
AP-75024 Rev. 1.2. – 18/08/2002
SWITCHING BETWEEN DYE INKS AND PIGMENTED INKS OR
CHANGING TO ECO-SOLVENT INK.
Use the INK CHANGE procedure to switch from DYE ink to PIGMENTED ink or from
PIGMENTED ink to DYE ink. Use the INK CHANGE procedure to switch from Dye or
Pigmented Ink to ECO-SOLVENT INK.
Important :
After using Eco-Solvent ink it is not possible to change to other type of ink
(pigmented and dye Inks).
Before installing and changing to Eco-Solvent ink, the machine needs to
go through a cleaning cycle with special Eco-Solvent transition liquid.
When using this function, cleaning cassettes need to be installed to the cassettes slots.
Plot OK
Step 1 :
To enter the Menu system, press the
[MENU]
key.
* Menu * Command >
Step 2 :
The key contents change to the yellow section
on the outside of the control panel. Bring up the
“Utility” menu by pressing the
[Menu up]
key or
[Menu Down]
key.
* Menu * Utility>
Step 3 :
Press the
[ENTER]
key to enter the “Utility”
menu and shift to the next level.
InkChange : No
Step 4 :
Bring up the “InkChange” item by pressing the
[Menu up]
key or
[Menu Down]
key.
InkChange : Yes
Step 5 :
Press the
[Value/+]
or
[Value/-]
key to select
“Yes” and press ENTER.
Change Waste Ink
Step 6 :
Empty the waste ink bottles.
Change Tank ? Yes
Step 7 :
Press the
[Value/+]
or
[Value/-]
key to select
“Yes” and press ENTER.