Installation Procedures
Operation Instructions Rockhopper Printer
Page
23
AP-75024 Rev. 1.2. – 18/08/2002
ASSEMBLING THE PRINTER
Caution:
•
Before lifting the printer body out of the box, make sure to remove all
plastic wrapping materials first, in order to avoid that the machine slips
from your hands.
Step 1:
Unpack the stand and assemble it by screwing the left and right stand legs to the cross
beam (upper bar)
(1)
and to the cross bar (lower bar)
(2)
. To do this, use the 4 long
hexagon bolts and the large hex wrench provided to secure the cross beam
(1)
, and 2 long
hexagon bolts to secure the cross bar
(2)
. Make sure the caster wheels are on the front.
After securing the bolts permanently, put on the two plastic side covers.
Step 2 :
First make sure to mount the left end plate (plate without motor box) to the left leg of the
stand.