Installation Procedures
Operation Instructions Rockhopper Printer
Page
24
AP-75024 Rev. 1.2. – 18/08/2002
Hook the left end plate between the leg assembly. Turn the left end plate diagonally, so
that you can put it in-between the left leg and then turn it right to fix it into place by means
of the hooks.
Fasten the left end plate temporarily with 2 bolts + washers (use a 3 mm hex key) onto the
bracket.
Push the endplate as much as possible to the upper side of the leg assembly, so you can
easily screw the printer body onto the stand.