Preparing for a job
Operation Instructions Rockhopper Printer
Page
49
AP-75024 Rev. 1.2. – 18/08/2002
Step 2 : Selecting roll take-up system
•
Press the Media-key to select
media loading sequence with roll
take-up system (Both LEDs ON).
•
By pressing the key you will see the
LEDs alternate between three
choices (sheet, roll and take-up).
Now select roll take-up loading
sequence (both LEDs ON).
Step 3 :
Take an empty cardboard core. Slide the empty cardboard roll over the scroller of the roll
take-up system.
Note :
Notice that one flange is fixed. A warning sticker is attached near the
flange. Do not remove this flange.
Step 4 :
Take your roll of media.
Step 5 :
Remove the moveable flange from the
scroller by pulling it off.
Movable Flange
Step 6 : Load the media onto the scroller.
Feed the scroller through the media core.
Gently but firmly press the roll media over the fixed flange.
Slide the moveable flange over the scroller and firmly press the flange inside the roll media
core.