Preparing for a job
Operation Instructions Rockhopper Printer
Page
52
AP-75024 Rev. 1.2. – 18/08/2002
Guide line (holes) can be seen
Guide line (holes) is hidden
Step 12 : Fine-tuning the roll media position.
If the guide line (holes) can be seen, the roll media must be moved to the right.
If the guide line (holes) is hidden, the roll media must be moved to the left.
•
Turn the scroller receiver screw counter-
clockwise to move the roll media to the right
(when standing in front of the printer).
•
Turn the scroller receiver screw clockwise to
move the roll media to the left (when standing
in front of the printer).
Important:
•
The guide line (holes) is a guide.
There is a possibility of a jam if the pressure roller is not holding the
left edge of the media and the pressure roller is near the right edge.
Either hold the left edge of the media completely with the pressure
roller or slide it so that the pressure roller is about 5 mm away from
the right edge of the media and the right edge of the media within 5
mm to the left or right of the guide line (holes).